Re: carb adjustment

Posted by Paul from MI on April 28, 2007 at 15:46:13 from (216.136.119.130):

In Reply to: carb adjustment posted by kyle gene on April 28, 2007 at 12:33:28:

Sounds like the float is bad or the needle vale isn't shutting off the fuel all the way. Either that or the electric pump may be building up too much pressure for the needle & float to control. Usally an eletric pump will pump fuel until the carb bowl is full and the needle valve closes. Then the eletric pump builds up to 3-5psi or so and shuts off. Properly done, the pump can be left on with the engine not running without flooding. Different pumps have different pressure ratings, yours may be too high or your needle valve and float are not right. Just a thought, hope it helps.
Paul

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]