Re: tig welding diesel tank.

Posted by edj856 on April 24, 2007 at 09:26:31 from (146.145.158.58):

In Reply to: tig welding diesel tank. posted by franget on April 24, 2007 at 08:47:42:

You can TIG weld the tank, but I would recommend steam cleaning the inside of it first, if possible. If you can't, it can be welded but you will most likely have a fire inside the tank. You can also weld on a gas tank after you have thoroughly steamed the inside of the tank with some 250 to 300 degree water. You can also MIG weld it, but it's easier to get a leak free weld in a single pass with a TIG. I've repaired several tanks, both gas and diesel, with MIG and TIG.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]