Re: 12v IH M ign

Posted by John T on April 22, 2007 at 05:57:11 from (66.244.90.5):

In Reply to: 12v IH M ign posted by MF294-4 on April 21, 2007 at 19:39:58:

If he still kept the 6 volt coil the points burn up prematurely cuz they are drawing/switching toooooooo much current plus the coil will get toooooooo hot. Do as Bob n the others mentioned and add an external voltage dropping (12 to 6) Ballast Resistor (around 1.5 to 1.85 ohms or so) or get a 12 volt coil so the points current is back in line and YES the coil polarity needs to match the battery so its more efficient, if + gnd + to distributor if - gnd - to distributor.

John T

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]