Re: skid steer quick attach help

Posted by NEIADan on April 20, 2007 at 20:19:08 from (70.41.38.150):

In Reply to: skid steer quick attach help posted by phillip d on April 20, 2007 at 18:36:09:

I have had to thaw my pins by heating the mounting plate. It is easiest if you tip the bucket clear forward and heat in line with the pins. perhaps heating and spraing with penetrant you can draw some in as it cools. A good red grease in a aerosol will actually follow the heat. Good luck.

PS to long a pipe will bend your levers. An air chisel hammering on the bottom of the pin could help as well. Let us know how you get it loose.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]