Re: Drive-Shafts-R-Us

Posted by Jeff Oliver on April 20, 2007 at 18:55:29 from (74.38.161.133):

In Reply to: Drive-Shafts-R-Us posted by Dan-IA on April 20, 2007 at 11:46:50:

What part of it is worn out? If it is just the U joints you can buy them and put them in. If the yokes are bad you should be able to get new ones and have a good machine shop cut the old ones out and weld the new ones in. We have a semi truck dealer in town and they have usually match up any end.

If all they have to do is replace the yokes it should cost more than parts and an hour labor.

Replies:

• Re: Drive-Shafts-R-Us Dan-IA 08:05:04 04/21/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]