Re: One-Wire Alternator to 3-Wire

Posted by Gene-AL on April 20, 2007 at 12:02:53 from (74.242.22.70):

In Reply to: Re: One-Wire Alternator to 3-Wire posted by John T on April 20, 2007 at 10:00:22:

John T.,
The tractor was already equipped with a 12V charge indicator lamp which, fortunately, was of a suitable size and also wired to the old alt/gen connector plug via one terminal on the old VR plug. After checking the manufacturer's electrical diagram, it took only a few minutes to unplug the original voltage regulator and then add a 6" wire extension with a terminal lug at the alternator end to make the change over(JD-2120).

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]