Re: One-Wire Alternator to 3-Wire

Posted by jpl on April 20, 2007 at 01:56:49 from (66.209.132.103):

In Reply to: One-Wire Alternator to 3-Wire posted by Gene-AL on April 19, 2007 at 19:57:27:

I had a one wire on m, it quit charging, before you just revved it up and it charged, i had it hooked through the ammeter, (i hooked a small wire to # 1 terminal and then to ignition sw, then put a toggle switch in the wire betwwen switch and alt, i start tractor and hit the toggle switch and it excites the alt and it charges, must been bad self exciter, works fine now.) next time i;ll use a three wire and hook up as per bobs instructions in archives. now if i can figure how to mount a alt on 560 gasser i;ll put on a three wire this time.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]