Re: John Deere 140 repower

Posted by Steve Crum on April 16, 2007 at 04:16:27 from (4.156.228.2):

In Reply to: Re: John Deere 140 repower posted by dds-inc on April 15, 2007 at 21:26:37:

Just be sure the alignments are right and you should be fine. The reason my engine did not break the original rod is the rod wore in as the engine distorted so no stress was produced, everything got old together. stick a new piston and rod in without correcting the bore/crank relationship and your asking for it. If I had known about this from the start, I probably wouldn't have broken the first rod. I'm just not going to spend another 2 years trying to find another block and crank, nore am I going to spend $1,300 on a new engine.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]