Re: Generac 25kW PTO Generator Problems

Posted by Oldmax on April 12, 2007 at 05:46:26 from (24.154.143.101):

In Reply to: Generac 25kW PTO Generator Problems posted by Dave Midkiff on April 11, 2007 at 05:48:10:

If your Diodes have gone bad you will have to feed DC to feilds to generate AC . they furnish DC to feild Coils . Check the diodes Take end cap off generator and check diodes . Also you might have to Flash Field Coils to get going after doing this , Can be done with a small Battery 6 to 12 volts touched field brush terminals I installed some wires and left them on mine . Start gen up and just touch for a second to terminals "with a volt meter on output of gen" voltage should start to climb to normal . Make sure you get polarty right .

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]