Re: KN air induction kit

Posted by Nolan on April 11, 2007 at 06:06:49 from (167.102.133.164):

In Reply to: KN air induction kit posted by Oliver Power on April 11, 2007 at 00:40:58:

The thing I don't like about K&N kits is the oil mist you get on your hot wire for the fuel injection.

Many oem vehicles have very restrictive air intakes, usually for the purpose of keeping noise down. How much power loss for how much noise reduction varies tremendously. There is no set rule for this one.

Have this guy show you the restriction, or pull back the fender liner and look for yourself.

OEM mufflers are another one where power is sacrificed for noise. One of my trucks had the muffler necked down internally to about 3/4" pipe diameter for noise reduction. The power loss was appreciable, to say the least.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]