|
Tractor Talk Discussion Board |
Re: Tractor engine quit
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by David Gray on April 09, 2007 at 11:41:32 from (72.26.132.246):
In Reply to: Tractor engine quit posted by Tim in MI on April 09, 2007 at 08:43:28:
Tim, a condenser is like a storage battery. It stores electricity and then when the points open (break) it enables the mighty shot for the plugs. To test, take an ohm meter and test it AFTER discharging any electricity. Discharge by holding the body to the tractor engine and then touching the wire terminal on the end to the engine at the same time(holding it by the insulator). Next, hook up your ohm meter with the positive to the terminal and the ground to the body. Let it charge for a minute, then unhook the meter and discharge it as described above, looking for a spark. If you have the spark, it's probably OK. The cheapest thing is to replace the condenser and try starting the engine.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
The Engine Rebuild Kit - by Curtis Von Fange. I always liked engine rebuild kits. They have all the replacement parts for overhauling an engine without going to the store to get gaskets, special measuring tools, or miscellaneous parts. They come neatly packaged, clean and tidy. But it's important not to let that packaging lull you into a false sense of security. The appearance of matching sleeves, pistons, rings, and bearings can cause frustration and agony if not properly measured and installed in a workshop environment. Following c
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|