Tractor Talk Discussion Board |
Re: POLE BARN CONSTRUCTION AND PEOPLE DOORS IN WIN
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Paul in WI on April 02, 2007 at 18:13:59 from (69.179.0.147):
In Reply to: POLE BARN CONSTRUCTION AND PEOPLE DOORS IN WINTER posted by n444 on April 02, 2007 at 10:50:15:
Well, you already have comments to minimize the heaving, I'll attack the problem a little different. Once the door is where you want it, e.g. it latches properly and the space all around the door is equidistant, take 1/2" sheets of plywood and screw or nail them in around the door frame to the pole barn structure. This will provide a rigid area that will have to move together when the frost moves things. It was not clear to me if there was concrete under the door frame or not. If the concrete moves indenpendently of the building wall and door frame then I suggest you remove the concrete out from under the door frame. That way when the concrete moves it will miss the door frame. Said another way, you want the concrete to move independent of the builing poles and door frame. Paul in WI.
Replies:
Home
| Forums
Today's Featured Article -
What Oil Should I Use? - by Francis Robinson. I keep seein this question pop up over and over again in discussion groups all over the web. As with many things there are often several right answers and a few wrong ones. Some purist I'm sure will disagree to no end with what I will tell you but most of us out here in the real world don't really care do we ? Some of them only bring their noses down out of the air long enough to look down them anyway. If you are like me you are only doing this old tractor stuff because you enjoy it. You
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|