Re: exhaust pipe welding

Posted by 135 Fan on April 01, 2007 at 20:19:29 from (68.149.46.121):

In Reply to: exhaust pipe welding posted by ChrisLSD on April 01, 2007 at 19:38:14:

It has to be preheated first of all. Brazing would probably be a good option but needs to be done by someone with experience. Specialty arc welding electrodes could be used. A good welding supply or specialty rod company like Eutectic could help. After it is repaired it will be very hot and needs to cool as slowly as possible. You could wrap it up in a fire proof blanket or bury it in dry sand. If it's small enough you could put it in a preheated oven right after welding and gradually lower the temperature. If you have a wife she might not approve of this method. Dave

Replies:

• Re: exhaust pipe welding dan hill 04:00:04 04/02/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]