Re: PTO/RPM

Posted by paul on April 01, 2007 at 14:00:34 from (66.44.132.154):

In Reply to: PTO/RPM posted by oldcraneguy on April 01, 2007 at 08:22:34:

Most typical implements are designed for 540 pto speed, and you will blow things apart running them at full 1000 rpm. Can be very dangerous.

Rated pto speed is typically as slightly less than full throttle, as you';ll see on the tach.

If the tractor can pull it, running at 1/2 throttle in 1000 rpm mode is ok with the typical 540 rpm implement. Just do not forget, & go to full throttle!!!!!!

I repeat, that can be very dangerous.

--->Paul

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]