|
Tractor Talk Discussion Board |
Truck wiring question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by NC Wayne on March 27, 2007 at 17:51:52 from (64.12.116.141):
Just finished building a beavertail and drop gate for a buddy's '98 Isuzu NPR HD truck so he can use it for landscaping and am trying to get it wired up. I've run into something I've never seen before and am wondering how to wire it and more so how I can wire a "normal" trailer plug to it. Every system I've ever dealt with has the standard two filiment bulb with the running lights on the dim filiment and the signals/brake on the brighter one. In other words the brake signal is running in the same wire as the turn signal to the same bulb filiment, so if you have the brakes on and turn on the turn signal what happens is the turn signal overrides the brake signal to make the light flash and when you turn it off the brake still keeps the bright filiment lit. This truck isn't like that, it has three wires, a left turn, a right turn, and a brake wire, all independent of each other. I've checked the signal wires to see if the energize with the brake and they don't, and the brake wire doesn't energize with either signal wire, and if I hook the say the left signal and brake wire together all that happens is the front signal lights when you hit the brake and the signal doesn't cancel the brake. I know I can wire it with each wire independent and the brake going to light other than the one used for the signal but doing that doesn't help when I try to wire a trailer plug for a trailer that has standard two filament lights. Anybody know anything about this particular truck and the odd way it's wired and does anybody have any ideas what I need to do for the trailer plug. Even better does anybody have or know where I can get a wiring schematic for this truck since I've also got some more troubleshooting to do on it before it leaves the shop. Any and all views, ideas, tips, or whatever you can offer would be greatly appreciated.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Weldin Basics, Part 3 - by Curtis von Fange. Oxy-acetylene Welding - Part One In our series on welding we have taken a brief look at AC and DC arc welding along with basic techniques and safety equipment required for safe usage. Since our premise is to cover welding types that might best be used on a farm environment we have kept our overview purposefully simple and general. The second type of welding that this observer finds quite useful in
... [Read Article]
Latest Ad:
For sale Farmall super A tractor is complete and has just been setting for awhile,it was running when pulled out of the barn,shouldn’t take to much to get it going asking 1100.00
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
