Re: 2 point - 3 Point Conversion

Posted by Thack on March 20, 2007 at 20:10:36 from (4.160.39.254):

In Reply to: 2 point - 3 Point Conversion posted by Robert Searcy on March 20, 2007 at 19:20:59:

Robert,

I have the bent type (hopefully) pictured here. I think you would probably need the bent type as they give more ground clearance. It is also nice to be able to use both cat 1 & 2 implements.

As to the quick hitch things, I take the adapters out and put them on the implement, back up and make the connection, hook up the top link and I'm off.

I'll assume your shafts are adjustable, if so they should be fine.

Replies:

• Re: 2 point - 3 Point Conversion flying belgian 05:53:22 03/21/07 (1)
  • Re: 2 point - 3 Point Conversion Thack 09:07:36 03/21/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]