Re: How to

Posted by Eric in IL on March 20, 2007 at 12:08:22 from (67.72.98.45):

In Reply to: How to posted by old on March 20, 2007 at 11:38:35:

I don't know which direction it is bowed, but if it is bowed from the side maybe you could torch cut several evenly spaced (maybe 18 inches apart) slots from the outer edge to the center web of the beam. It would be easier to straighten, then weld the cuts up after it is straight. If you cut the slots on the "long" side of the beam they would close up as it was straightened. May or may not work, but I am thinking you are going to wish that tractor was alot heavier when you start trying to bend it back to straight.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]