reinventing the wheel

Posted by Farmer in the Dells (WI) on March 19, 2007 at 05:01:08 from (66.187.42.122):

I installed a new tube on a tractor rear and was able to salvage most of the original fluid. My installer had a pump to put it back in that failed before he got very much back in. I tried to hand pump it in and the fluid moves freely without hooking the hose to the valve stem. Once I hook it up I can't get the fluid to move. There is so much back pressure the fluid gets past the seals in the pump. The valve core is out. I have tried letting the tube down (the tire is vertical and reinstalled on the tractor) to let the air out and a few other things but no luck. What am I missing and why won't the fluid go in?

Replies:

• Re: reinventing the wheel Dave Sherburne NY 10:04:10 03/20/07 (0)
• Re: reinventing the wheel KEH 18:18:57 03/19/07 (0)
• Re: reinventing the wheel rrlund 12:35:30 03/19/07 (0)
• Re: reinventing the wheel glennster 10:58:14 03/19/07 (0)
• Re: reinventing the wheel MN Bob 06:56:47 03/19/07 (0)
• Re: reinventing the wheel IH2444 05:18:20 03/19/07 (3)
  • Re: reinventing the wheel Farmer in the Dells (WI) 05:35:43 03/19/07 (2)
    • Re: reinventing the wheel IH2444 06:47:45 03/19/07 (0)
    • Re: reinventing the wheel buickanddeere 05:56:10 03/19/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]