Re: Horsepower for 3 Pt snowblower

Posted by Wardner on March 17, 2007 at 21:10:49 from (4.154.247.132):

In Reply to: Horsepower for 3 Pt snowblower posted by hoverido on March 17, 2007 at 19:06:38:

Like the others said; two much speed and not enough power.

Now, IH had an attachment called the Hydro-Creeper that was engineered for the A. Something similar could be adapted for the H. You would need live hydraulic power from a later SH, 300, 350 or aftermarket. This would feed power to a large hydraulic motor coupled to one of the bull gear pinions. Vehicle speed and direction would be controlled with a hydraulic motoring valve and an adjustable flow divider. The trick to this installation is proper sizing of the hydraulic motor and a provision for easily separating the "creeper".

Unless you like engineering challanges, just get a tractor with a hydro transmission.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]