Re: case 960 combine ?

Posted by KRUSS1 on March 16, 2007 at 18:26:24 from (142.161.198.45):

In Reply to: Re: case 960 combine ? posted by dairyman on March 16, 2007 at 17:03:16:

We had a Case 960. It had a Chrysler Slant 6 engine, I'm guessing 225 cu. in. The combine was sure nice to drive, steered well and turned short, variable speed worked well. For the width of cylinder it did not have the capacity of some other makes. This I think was due to the relatively small diameter of the cylinder (which in our case was rub bar type). I understand that if you had a spike tooth cylinder, then you added capacity. This was not a choice for us as we were picking up wheat/barley/oats/canola swaths and even a small stone would do a pile of damage to stc. I was never satisfied with the way the feeder chain fed the cylinder. Ours burned in a shed fire, was replaced with 914 IH PT which was 2 to 3 times the machine as long as you had the hp to run it.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]