Re: Hyd Cyl Rebuild

Posted by Dick on March 12, 2007 at 12:58:01 from (66.78.69.115):

In Reply to: Re: Hyd Cyl Rebuild posted by 135 Fan on March 10, 2007 at 21:10:56:

Hi,
While on the subject of Hyd. Cylinders. I have a question. When ordering the seals for a cylinder, what sizes do you have to have to order the seals?
Do you have to tell them the size of the bore of the cylinder? The size of the piston that holds the seals? Can you order the seals without taking the cylinder apart? Just wondering since I have some cylinders that need to be rebuilt and would like to have some information before I start.
Thanks in advance,
Dick

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]