Re: snowblower for 3pth

Posted by Rod in Smiths Falls, ON on March 12, 2007 at 05:29:56 from (209.71.222.52):

In Reply to: snowblower for 3pth posted by jaybird-oh on March 11, 2007 at 17:12:37:

I have used a 60" two stage, single auger on a tractor 66" wide and 37 hp. for the last three years. Only this month did I run into drifts where the extra width of the tractor posed a problem, requiring repeated cuts at the snow from a slight angle.

On the other hand the smaller implement proved a good match for the tractor's power band in very heavy cutting in one two-hour session. The rear tire chains helped break up the hard snow in the tall drifts to make it easier to blow.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]