Re: Hey georgeky .. #'s on c with white paint

Posted by gots-2-go on March 11, 2007 at 20:23:10 from (69.72.54.181):

In Reply to: Hey georgeky .. #'s on c with white paint posted by roger roland on March 11, 2007 at 19:30:18:

The following information was copied from a post on the Farmall Board. This post was listed by "CNKS�, he does seem to know a lot about these tractors:

"The serial numbers from the 1st quarter of 1950 when the white C's were produced: 47010 - 54411. At that time IH did not use primer, but hard telling what has been done to it since then. Some tractors did have a whte sealer on the cast parts, in case there was a leak or a seep".

If it fell within that number range and I owned it I belive that I would restore it and paint it white. You don't seem to see many of them at shows in my neck of the woods.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]