Re: snowblower for 3pth

Posted by Michael Soldan on March 11, 2007 at 17:46:23 from (24.235.41.226):

In Reply to: snowblower for 3pth posted by jaybird-oh on March 11, 2007 at 17:12:37:

You need a two stage blower that is the width of your rear tires outside to outside measurement, usually a 5.5 or 6 foot will catch most utility tractors. If you get a lot of deep snow, then a double auger is the way to go, singles work fine, you can always raise them a foot or so and make a cut and then drop them down to clean a swath that is too deep for one pass. I run a single two stage on a 52 HP tractor, only the deepest drifts cause me to make two passes.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]