Re: Bucket Fabrication

Posted by Keith-OR on March 09, 2007 at 09:03:43 from (207.200.116.14):

In Reply to: Bucket Fabrication posted by Rick Fanning on March 09, 2007 at 06:57:17:

Rick, If I can pictures of the bucket I made I will post them. I used 3/16 plate and a piece of 2x4 w/0.25 wall thickness across the top, this was to weld hooks for using chains to pickup heavy items that would not fit in my bucket.

If I don't find the pictures today I will try to post them Monday or email them, as we are headed out early in the morn(long drive) to State Special Olympics Power Lifting finals this week-end. Shawn(son) is participating.

Keith & Shawn

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]