Re: Hydraulic Woes

Posted by Tom R Ne on March 07, 2007 at 04:17:21 from (71.31.215.153):

In Reply to: Re: Hydraulic Woes posted by Allan In NE on March 07, 2007 at 04:04:07:

Allen:

I think I used 1N5404 diodes, anything with a rating around 400 Volts PIV and 3 Amps should work.

Radio Shack diodes would be fine or a couple of diodes from AC clutches if you already have them around would work.

Yah- you would think the manufacture would cover all bases, since mine was home brewed I just overlooked it that first time, but as soon as I tore the switch apart and seen the evidence of Arcing it dawned on me that I had screwed up.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]