Re: Allan will that loader pickup a bale.

Posted by Allan In NE on March 05, 2007 at 17:04:12 from (148.78.243.26):

In Reply to: Allan will that loader pickup a bale. posted by IaGary on March 05, 2007 at 16:33:43:

We gots problems. :>(

Can you not inter-marry pioneer couplings? What I mean is, can't you use the male with the ball against a female that normally uses the "tip" kind?

I'm dead on one side and have about narrowed it down to the tips that the previous owner had on one circuit that I just left on and plugged into these new fittings.

Both solenoids "snap" like they should, the grapple works fine when I push the little button, but when I release the button, the solenoids reverse and I can hear the tractor's hydraulics dead-head instead of working the tilt. All the hydraulics on the loader work okay, 'cause I've tested 'em and all is well.

Help!!!

Allan

Replies:

• Re: Allan will that loader pickup a bale. Don-Wi 00:49:37 03/06/07 (0)
• Re: Allan will that loader pickup a bale. jhill52 20:04:40 03/05/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]