Re: Thin, Dirty Oil Question

Posted by mike a. tenn. on March 05, 2007 at 08:38:17 from (75.120.200.24):

In Reply to: Thin, Dirty Oil Question posted by Rick Fanning on March 05, 2007 at 08:27:10:

rick...yup...you could have gas in your oil, and yup, you could have a carb float not closing that would cause it. were i you i'd pull the carb, take it apart, soak it in some carb cleaner over night and see if it fixes it. so...yup...you might wanna check your float first and see if that's the problem. if it isn't you get other troubles.

gas running down your cylinder walls isn't good for it either. it'll strip them of your lubricant and you'll be starting with dry cyliders till the oil reaches them. that's to say nothing about how gas in your oil just flat ruins it's lubing properties...so you really need to get it straightened out.

-mike

Replies:

• Re: Thin, Dirty Oil Question RIck Fanning 08:44:56 03/05/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]