Re: laser thermometer

Posted by MN Scott on March 04, 2007 at 20:44:47 from (206.9.216.73):

In Reply to: laser thermometer posted by bm3501466 on March 04, 2007 at 19:40:06:

I have a Raytec that works great. As others have said you need to be as close as possable. Works great for finding a missing cylinder on a gas or diesel. I also use mine to check the bearings on my round baler and combine. Just run the machine awile to get it warmed up then shut it down and walk around zapping the bearings. Most bearings run about 100 to 150 degrees. If you find one running a temp you know its time to replace it. Saves time and the danger of fire or damaging other parts. A good investment in my opinion.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]