Re: Cast iron repair

Posted by NE IA Dave on March 04, 2007 at 18:55:33 from (12.206.8.41):

In Reply to: Cast iron repair posted by Tennessee Red Iron on March 04, 2007 at 16:56:52:

If you give it a coat of heavy primer in just that general area and throw a handfull of sand on to it always works well. Then put your final coat over the sand. The trick is to feather it in a random over spray pattern, a little less sand as you get farther out away from ground zero. No one will ever know unless you tell them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]