Re: Tire Bead Breaker Tool

Posted by T_Bone on February 27, 2007 at 09:55:19 from (4.240.90.148):

In Reply to: Tire Bead Breaker Tool posted by in-too-deep on February 26, 2007 at 19:23:51:

Hi ITD,

I use a wood splitting maul that works really easy. I spray the bead with dish soap/water then set the maul on the rubber/steel joint then hit the maul with a single jack hammer one time, move 4" and repeat. This will pop the bead in 3 or 4 moves. Don"t have to swing hard just a firm blow. Once the outside bead pops the inside bead pops faster.

I have a backhoe with the solid wheels and this is the easiest way I"ve found as I don"t have to remove the wheel. I"m all crippled up and can repair a rear tire in a hour.

T_Bone

Replies:

• Re: Tire Bead Breaker Tool in-too-deep 12:09:46 02/27/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]