Re: Electrolysis HELP!!!!!!!!!!!!!!!!!!!!!! PLZ

Posted by rhouston on February 22, 2007 at 13:15:27 from (141.149.254.93):

In Reply to: Re: Electrolysis HELP!!!!!!!!!!!!!!!!!!!!!! PLZ posted by RustyFarmall on February 22, 2007 at 13:01:26:

The sacrificial metal and the part to be cleaned should be within several inches of each other for best results. I use an old unintelligent battery charger on my setup. Generally I find that if everything is hooked up properly and you don't get the bubbles then more washing soda needs to be added. I find sheet metal covers from VCRs and old computers work well but need frequent cleaning. I do the small parts in one of my wife�s discarded stainless steel pans using it as the sacrificial metal. One key item I've seen people consistently do wrong. The sacrificial metal should have as much surface area as possible and surround the piece being cleaned.

Replies:

• Re: Electrolysis HELP!!!!!!!!!!!!!!!!!!!!!! PLZ 1941 farmall a boy 13:24:06 02/22/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]