Re: OT Pickup Dump's

Posted by Fawteen on February 19, 2007 at 03:13:07 from (66.181.126.140):

In Reply to: OT Pickup Dump's posted by ed1 on February 18, 2007 at 19:06:22:

Got one, love it, wouldn't be without it.

Three hints:

1. Make a subframe rather than attaching the upper pivot point directly to the sheetmetal floor of the bed.

2. If it uses an electric over hydraulic pump (like a snowplow pump) mount it behind the seat in the cab, not under the frame where it'll get all crudded up.

3. Make sure all the pivot points in the linkage have grease fittings. Mine didn't, and after it seized up and broke (with a load on, of course...) I drilled and tapped it for them.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]