Tractor Talk Discussion Board |
Re: O.T...Old Barns
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by RayP(MI) on February 17, 2007 at 14:03:58 from (216.46.208.236):
In Reply to: O.T...Old Barns posted by mike a. tenn. on February 17, 2007 at 07:39:31:

Here's ours - built in starting late 1940's - first used in 1952, as a dairy barn. Walls hand poured 12" thick concrete. Rafters are arched hand laminated, there's no inside framework! Most of the lumber was harvested off the farm, gravel for concrete was hauled by hand from pit at back of farm. Screened on a screen shaker power by old washmachine motor. Forms were hand built. Concrete mixed in hand mixer, and carried up ramps in wheelbarrow. Only help Dad had was the thrashing crew came in one Saturday, and they set the rafters with a ginpole. When he put roof boards on, he skipped every 4th or 5th so he had a way of climbing the roof. Roofing was put on in th winter - Dad built a rack to hold 1/2 a bundle, and brought in and warmed shingles in oven to make them soft enough to lay (T-lock shingles.) WONDER WHY THEY DON'T BUILD THEM LIKE THIS ANYMORE? While my Dad was building this, my uncle was building his, a more conventional structure. Both barns are still in good structural shape, and should last a long time. Uncle's is going to need siding attention soon as boards are starting to deteriorate. Ours has had three sets of shingles, and now sports vinyl siding over old ship-lap lumber siding. Should be good for quite a while. This makes both barns about 60 years old, young compared with their neighbors, several of which have fallen in the last few years.
Replies:
Home
| Forums
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|