Re: Problem with Ford 300 engine

Posted by tractorbug on February 11, 2007 at 09:04:35 from (72.82.188.202):

In Reply to: Problem with Ford 300 engine posted by Leaky Boot on February 10, 2007 at 19:32:20:

Check for a EGR valve stuck slightly open,remove and check passage way.vaccum leaks at manifold were always a problem with these trucks.also the 1 bbl. carbs. would work there way loose at the mid section u might want to check that.Also make sure the mechanical advance in distributor is not sticking.These engines were also known for lifters giving out around that mileage !
BUT THEY WERE GOOD ENGINES !!Hope this helps.
Randy

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]