Re: Tractor stability when removing rear tire

Posted by Walt Davies on February 08, 2007 at 08:05:45 from (72.173.58.4):

In Reply to: Tractor stability when removing rear tire posted by KYfarm on February 07, 2007 at 14:32:05:

Standard cribbing is 2X12X24 put side by side then two nailed cross ways on top. Keep crossing and building to get the height that you want. You can use 2X6 or 2X8s for smaller tractors but remember the wider the foot print the safer it is. We had these made up in several different heights up to 2 ft. for big equipment. Never had one fall or brake as long as I was there, 13 years. Fir or pine is plenty strong enough for anything short of Trains they use Oak. If your barn floor is fairly level then it ain't going no place.
Walt

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]