Re: Thawing a manure spreader, any hints?

Posted by Robert Searcy on February 05, 2007 at 15:31:23 from (144.226.230.36):

In Reply to: Thawing a manure spreader, any hints? posted by barnrat on February 05, 2007 at 14:11:48:

There is no doubt the nipco will do the trick as long as you get the plywood around that thing, should be easy since it is much more rectangular than a tractor trying to trap the heat so it would flow up, the bottomm of the spreader will form the top so the heat will be force up by gravity

since the chains are on the bottom that will be the first thing to come loose.

we had everyone of those tractors running in sub zero temps within 15 minutes, i couldnt believe it!!!

it was a 150,000 btu nipco

i had never used one before, but man was I sold!!!

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]