Tractor Talk Discussion Board |
Re: help with 12 volt conversion
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by Dan Fischer on September 24, 1999 at 16:19:10 from (206.191.194.218):
In Reply to: help with 12 volt conversion posted by Sam on September 24, 1999 at 12:28:52:
The reason that you are getting nearly 12 volts after the resistor is that a resistor only reduces amperage. Your tractor will work quite well with the resistor reading 11.8 volts. It will not burn out the coil because of the reduced amperage.
Follow Ups:
Post a Followup
|