Re: Allis Chalmers D17 Series IV hydraulics

Posted by JMS/MN on January 24, 2007 at 10:24:19 from (204.73.106.15):

In Reply to: Allis Chalmers D17 Series IV hydraulics posted by Jon Wolter on January 23, 2007 at 08:28:05:

If you have a Series IV it has an independent hydraulic pump on the right side, where the belt pulley would mount on earlier Series. You have live hydraulics whenever the engine is running-foot clutch pushed in or not. For your all hydraulic loader to work you need two hydraulic circuits, at least one of which must be a two-way to run the bucket cylinder(s). Many loaders use a one-way for the boom lift. Not sure which valves were standard and which were optional, but you certainly can set up your system to do what you want. Do you have 3 hyd levers? One for the 3pt, the other 2 run separate valves?

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]