Re: MF65 Tempature Gauge and overheating

Posted by RAB on January 23, 2007 at 22:33:43 from (195.93.21.42):

In Reply to: MF65 Tempature Gauge and overheating posted by twigs on January 23, 2007 at 21:33:47:

Lots of things. Temperature sender unit (transducer), fanblades on back to front, fan belt slack or worn, water pump bearings, blocked air passages in radiator, blocked water passages in radiator. Assuming you are using tractor with hood closed and idling with hood open. Carburation, timing or air leak into the inlet manifold if it is a gas engine. Could be others.

First you need to know what the engine coolant temperature is when the guage reads high. May be no problem at all.

Sugggestions for repair? Find whether there is a problem, then what it is, then repair it.
Regards, RAB

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]