Re: JD 2755 Hy Capacity Clutch

Posted by RodInNS on January 20, 2007 at 14:05:41 from (142.177.76.87):

In Reply to: JD 2755 Hy Capacity Clutch posted by R. John Johnson on January 20, 2007 at 08:15:33:

John,

Dunno about the Deere stuff, but I've used hy-cap on Massey imports and my Ford's, and no trouble so far. It seems to be a pretty good line of stuff. Another one you can look at would be central east farm supply. I've gotten clutches from them in the past at a considerable saving, with the Borg & Beck stamp, the same as OEM.... Only thing is, ya gotta watch the prices because sometimes they're more money than OEM... and sometimes they're a lot less. Worth a look, and I'd have no concern over either of these aftermarket suppliers.

BTW, if you've only done 3 clutches in 20000 hours, there's no shame in any of them. 3500 hours is often about the service life of most dry clutches on loader tractors.... Good luck.

Rod

Replies:

• Re: JD 2755 Hy Capacity Clutch R. John Johnson 15:53:45 01/20/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]