|
Tractor Talk Discussion Board |
Re: 1995 Dodge Ram 4x4 front axle engagement for f
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by david from mo on January 15, 2007 at 23:07:16 from (72.35.163.7):
In Reply to: Re: 1995 Dodge Ram 4x4 front axle engagement for f posted by REYNOLDS on January 15, 2007 at 20:09:14:
Tuneup guys can find the vacuum dump line under the hood thats supposed to vent vacuum and plug it or connect it to vacuum. That will cause the 4 wheel to not work correctly. Marlowe and Gary are both correct also. Would be a easy fix for a true dodge or 4 wheel mechanic. You could run a vacuum line direct to the apply side after the check valve as a shade tree repair cap the other port to keep clean. Chysler master tech ,Ase Master Tech 25 years
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Looking for a minneapolis moline zts
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|