|
Tractor Talk Discussion Board |
Post Beam Barn - followup pics
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Jon(IN) on January 15, 2007 at 06:47:13 from (63.165.98.157):
This is a followup to my post the other day. Here are some more pics. I guess my biggest question is what type of puller to use to get the beams back together. Then, as suggested, I will use a turnbuckle to hold it in place with a cable. Then get the foundation corrected.
Any other thoughts? There are some more pics in the link provided. two pictures are of the existing cable and puller that's been in place for 25+ years. This is on the 2 center beams of the barn The forth picture is of the corner that needs rebuilt. This is the worst corner of the barn. http://s147.photobucket.com/albums/r310/66jd4020/ http://i147.photobucket.com/albums/r310/66jd4020/barn1.jpg
Jon
>>>>>>>>
I've got a 110+ year old post and beam barn that needs some rework done to it. It's approx 50'x 65'x 30' tall. The foundation has settled in some corners and some of the lower walls have rotted away. I am in the process of jacking some of the corners up and resetting them. The thing really needs a roof, then it will be good to go, but I want to get the foundation solid, before putting the expense of a roof on it and trying to jack around on it after the roof is on. Here's my question though. Some of the horizontal beams have either rotted or came apart at the joins with the upright beams. These are in the main structural area. Some have been repaired in the past with iron straps bolted through them to hold them together, and one in the middle has a cable tied between the 2 uprights to hold them in unison. Kind of hard to explain but hopefully you get the picture. I have attached a pic I tood a while back of a corn picker, but you can see somewhat how the barn is built. This picture is along the edge though and doesn't show the structural part of the barn. What size cable do you think is needed to pull and hold the uprights together. Could I get by with a small cable and say a 4 ton puller? The one that is on the middle uprisers is a large 3/4" cable and chain type comealong.
Maybe I will get some pics to help explain. But any thoughts from anyone with this type of experience would be appreciated.
Oh yeah, ( I don't want this to sound rude) but I don't need a lecture about how dangerous this stuff is and to let it up to a professional. I am very aware of the dangers and take lots of precautions when we work on it. Thanks, Jon
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
