Tractor Talk Discussion Board |
Re: Is it worth it???
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Raleigh Boulware on January 14, 2007 at 09:43:25 from (71.81.29.77):
In Reply to: Re: Is it worth it??? posted by RodInNS on January 14, 2007 at 09:13:36:
You know I am REALLY considering buying something cheap! and doing alot of the work my self. It appears that these inframes are not that hard to do that is IF the crank is in good shape! But knocking a few sleeves out and rplaceing them does not seem difficult to me while the oil pan is off and the head is off. The part that seems to scare me the most is the stuff behind the fly wheel!! having to split the tractor seems to be a ton of work!!! So buying a wore out tractor you have to be carefull as well. But it seems that the tranny and reare ends seem to be the more stronger parts of this tractor. But it seems even the machines that are "Wore Out" and Cheap are not so cheap! people want an arm and leg for them as well!
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|