Tractor Talk Discussion Board |
JD No. 50 Side Mount Mower
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Glen in TX on January 14, 2007 at 08:12:43 from (208.246.9.71):
In Reply to: Bottom PTO on 4020 posted by Raleigh on January 13, 2007 at 12:55:03:

JD No. 50 side mount sickle mower drives off front mid shaft PTO on JD 2510,3010,3020,4010,4020 row crop and standard tractors and maybe some later JDs also. Also with a different frame mount bracket & drive pulley fits JD 1020 & 2020 utility tractors. Made 1960s ? 1966 till ?? Crankshaft speed 900 RPM drives off 1000 RPM PTO. A different deeper frame mounting bracket and longer pulley with spacer is used for the taller row crop tractors than with the utility tractors. Belt drive with a double groove pulley with split center mounted on mid front PTO shaft. Covered in Operator Manual OMH62804 for mower serial numbers before (****-3000), Operators manual OME41162 serial#s (3001- ), Part Catalog PC1012.
Replies:
Home
| Forums
Today's Featured Article -
My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that’s wha
... [Read Article]
Latest Ad:
1964 I-H 140 tractor with cultivators and sidedresser. Starts and runs good. Asking 2650. CALL RON AT 502-319-1952
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|