|
Tractor Talk Discussion Board |
Re: What is a pony??
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Billy NY on January 13, 2007 at 03:33:53 from (152.163.100.74):
In Reply to: Re: What is a pony?? posted by NEsota on January 12, 2007 at 22:26:48:
Hate to dispel a rumor, and am curious where you heard this one. It is physically impossible for the starting engine to increase or add power to the diesel while it is running, the centrifugal force of the diesel disengages the starting engine's pinion, if it didn't, it would overspeed the pony and toss a rod, and sometimes the spring on the pinion latches is out of adjustment and it will release too soon, just one piston has to fire and it will disengage, you have to hold the pinion lever engaged when it's out of adjustment, manually release it as soon as the main fires, disenage it. Those little splash lube, old technology, but high rev starting engines don't tolerate too much, have to keep the oil super clean, check for gasoline contaminating the oil, the old Zenith carbs can leak down and fill yer pony crankcase until it leaks out the dipstick if you don't turn the gas petcock off at the sediment bowl, and it's also a smart move to drain the bowl as soon as it fires, so it don't leak down while yer runnin it. Lot of tricks to them but well worth having, when working well, one spin on the handcrank an it will fire off on the first crank, down into the 40's no problem, colder, nice to have an electric start option. Although not a good practice, I have heard of people using the starting engine, to move a dead caterpillar tractor a shot distance, when the diesel would not fire, would have to keep the compression off anyways, no way it would turn the main under compression and also have enough to move it. Not a good thing to do but apparently can be done, probably only on the flat on hard ground.
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|