|
Tractor Talk Discussion Board |
Trucks Lic in WA and Insur state Re: Dump truck in
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by benny2 on January 11, 2007 at 22:50:31 from (66.45.222.53):
In Reply to: Re: Dump truck insurance posted by phil_in_WA on January 11, 2007 at 22:11:37:
I live in Wa and here is how you can vastly reduce farm truck lic cost. One if you have a farm you can cut the cost in half by getting the Lic as a Farm Truck there are some restrictions check with the state as to what they are. This would be a Farm Lic NOT a Farm Permit big difference, In Wa there is NO Lic Tag fee for any truck. The fee is for Tonnage. And misc filing fees. If you GWV is over 14000 GVW you can get tonnage by the month, just buy what you need for that month, it is available in 2000lb increments. You have to buy at least14000 for the first due reup every year that tags are due. But this can be higher a weight min depends of the empty weight of the truck. I have 10000 empty on a GMC 7000 and can buy lowest 16000 on it and a Chev 301T dually at 8000 empty and get the lowest 14000 on it. As for insurance Grange insurance Wa will insure trucks at a very low cost even though they don't carry all of your insurance with them just need to have ANY main carrier. They can also put the insurance on when needed. Just look in the yellow page under Insurance for Grange. Most all the Trucks around here are grain dump beds mostly insured for the months "Harvest time". Mine don't dump and it does make a difference. I don't have casualty, just the legally required liability, Check it out for yourself. I think I have my costs down to as low as I can legally get ;)) PS in WA DONT get caught with more weight than you bought that will get REAL expensive for you!!! They are real NASTY in WA about that ;((
Replies:
Home
| Forums
| Order Support
Today's Featured Article -
History of the Field Marshall Tractor - by Anthony West. Any restorer who has some knowledge of turn of the century farm machinery, will recognize the name Lanz Bulldog!! This machine was to say the least unusual in its appearance. The huge flywheel and coffee percolator shaped exhaust. Along with square body lines and cylinder head protruding forward of the front axle. Would become the visual differentiation that people would quote to separate the Lanz from other period machines. The Marshall company based at the Briannia Works in Gainsborough
... [Read Article]
Latest Ad:
1958 FORD RARE 4x4 801 TRACTOR, ELENCO/FRONT DRIVE, FRONTLOADER AND WEIGHTED REAR WHEELS, FIVE SPEED, LIVE PTO, GAS ENGINE, NEW REAR WHEELS AND TIRES, ENGINE RUNS.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|