Re: Loader on JD5020

Posted by John A. on January 01, 2007 at 21:10:54 from (63.233.75.184):

In Reply to: Re: Loader on JD5020 posted by Raleigh Boulware on January 01, 2007 at 19:10:07:

Raleigh, I got to thinking later and I must have surenough gone drain dead. Your 158 will bolt straight up on a JD 4230 also. It is basicaly a 4020 in 30 series skin! find you one with a Power-shift and you will be in tractor heaven. Though there were no gassers made though, But the PTO is 540/1000 changeable, only remove the lock ring and pull out one and insert the other, then replace the lock ring.
There are a few 4wd conversions out there though most of the older ones are hydrolic run, not M4WD. Good Luck, Hope this helps.
Later,
John A.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]