Re: Ideas for a cheap valve spring compressor

Posted by Philmar Farms on January 01, 2007 at 10:52:48 from (24.209.127.125):

In Reply to: Ideas for a cheap valve spring compressor posted by cranbrook farmer on January 01, 2007 at 10:30:44:

I used to use an open end wrench. Choose a size that will push on the retainer and leave room to get the keepers in. Use a loop of baling wire through a head bolt hole as a fulcrum. Move wire and repeat. A dab of grease on the keepers will hold them in place while assembling. Phil

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]