Re: It's Going In There No Matter What

Posted by Hurst on December 23, 2006 at 08:30:36 from (204.255.227.157):

In Reply to: Re: It's Going In There No Matter What posted by Allan In NE on December 23, 2006 at 05:38:27:

The guy that works on our ford tractors has to flatten the tires on 7710s to get them into his shop if they are on 38 inch rubber. He doesn't run them all the way to the rim, just enough to get the tractor under the shed door. Not sure if you could lose enough by just flattening though. Maybe swap out the tires on the rears for some 34s or 30s just to get it in the garage if you have any duals sitting around that will bolt on those hubs? Good luck with your mission. We just got our 6610 out of the shop this morning after a clutch job and replacing the seals in the dual power and rear main.

Hurst

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]